Posted on Leave a comment

PTLOX Portable Therapeutic Liquid Oxygen System by ESSEX

PTLOX at Iteleti.com

PTLOX Portable Therapeutic Liquid Oxygen by ESSEX INDUSTRIES

Also known as Portable Therapeutic LOX, PTLOX, and Essex CRU-87/U Portable Therapeutic Liquid Oxygen System.

NSN 6530-01-222-9494

MANUFACTURER PART NUMBER

or P/N 50C-0021-1

(MPN CRU-87/U OXYGEN CONVERTER)

 

The PTLOX by ESSEX is a PORTABLE LIQUID OXYGEN SYSTEM

The PTLOX Portable Therapeutic Liquid Oxygen System is a low pressure portable 10 liter liquid oxygen storage and gaseous delivery system.

 FDA Life Support device 510(k) number K880183 (PTLOX)

  • Indicator Power runs on two (2) 9-Volt Alkaline Batteries
  • Three (3) Schrader Quick Disconnect Ports

CRU-50/A Fill Valve Accessory Kit (P/N 50C-0021-0001-1) Includes:

  •      Three (3) 20’ Medical Grade Hoses
  •      Three (3) Flow Control Valves: 0 to 15 LPM with 11 Settings (0.5, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15 LPM)
  •      Three (3) Humidifier Bottles

The ESSEX PORTABLE LIQUID OXYGEN SYSTEM PTLOX Weighs in at 50 pounds when empty or at around 80 pounds when full. Portable, the PTLOX can be carried by one or two people or mounted in vehicle, vessel or aircraft.

PTLOX Portable Therapeutic Liquid Oxygen System by ESSEX

(Click link below)

MORE INFO HERE AT ESSEX INDUSTRIES

PTLOX

SPECIFICATIONS

Capacity: 10 Liters
Dimensions (W”xL”xH”): 18.2 x 20 x 24
Weight, Full: 80 lbs
Weight, Empty: 55 lbs
Total Gaseous Volume: 8,600 Liters
Flow Rate: 45 LPM
System Internal Pressure: 85-120 PSIG
Delivery/Outlet Pressure: 50 ± 5
Operating Temperature: 40° F to 140° F
  • P/N 50C-0021-1
  • NSN: 3655-01-222-9494

CONVERTER-STORAGE UNIT FOR USE IN TO SUPPLY OXYGEN ON THERAPEUTIC BASIS(93-100%) TO MAX OF 3 PATIENTS AT A RATE OF 15 LITERS PER MINUTE

INCLUDES: 

  • CARRYING CASE
  • THREE 20 FT HOSES
  • FLOW METERS
  • HUMIDIFICATION BOTTLES
  • 18.2″ D x 15.0″ W x 22.5″ H

Liquid Oxygen

There Are Only 6 PTLOX Left in Stock. This item Will NOT be ReStocked!!!

 

 


Quantity



 

Posted on Leave a comment

WELCH ALLYN PROPAQ ENCORE

PROPAQ ENCORE MODEL 202EL  by Welch Allyn

Outstanding Quality and Value – Propaq Encore
Unmatched durability: Engineered to withstand shock up to 50g. The preferred monitor for air transport programs and military agencies around the world. Just a few of the Key Quality and Value points:

  • Low annual cost of ownership and unmatched reliability
  • One monitor suited for both transport and bedside — no break in monitoring and no need to change sensors
  • MUST PURCHASE Accessories and AC Power Adapter and you’ll be ready to use

Features common to all Propaq Encore Models

  • ECG, 3-lead or 5-lead configurations, 0.05-40/0.5-40 Hz
  • NIBP, with neonatal, pediatric and adult modes
  • Temperature, 2 channels: YSI 400 and 700 series-compatible connectors
  • Defibrillator Synchronization
  • Real-time Analog output of ECG
  • Electrocautery noise suppression on all channels except Impedance
  • Pneumography

 

Propaq Encore Model 202EL

 

Motion Tolerant Monitoring – Propaq Encore 

Welch Allyn’s patented Smartcuf® NIBP available with motion-tolerant pulse oximetry (SpO2) technology from Masimo® or Oximax® technology from Nellcor. Accurate readings during motion or low perfusion lead to more informed treatment decisions, fewer nuisance alarms and quicker readings save valuable time. Ideal for transport, pediatric, shivering or shock patients.

  • List of Features:
  • • Low annual cost of ownership and unmatched reliability
    • One monitor suited for both transport and bedside — no break in monitoring and no need to change sensors
    • MUST PURCHASE Accessories and AC Power Adapter and you’ll be ready to use

Roll Stand Kit for Welch Allyn Propaq Encore (CS SPO2 Monitor)
MPN: DU-PR-0013-04

GCX Roll Stand Kit for Welch Allyn Propaq

See Installation Guide at GCX Instrument Mounting Systems

PROPAQ ENCORE MODEL 202EL (No Invasive Pressure)

  • Pulse Oximetry (SpO2)
  • Capnography (CO2) (available only with SpO2):
  • Mainstream Capnography (MCO2)
  • Sidestream Capnography (SCO2)
  • Dualstream Capnography (Both MCO2 and SCO2)
  • Impedance Pneumography (RESP) (available only with SpO2)
  • Printer (Not Included)
  • HP-compatible side panel
Posted on Leave a comment

Welch Allyn 53NTO Vital Signs Monitor 300 Series

Welch Allyn Vital Signs Monitor 300 Series 53NTO

A Great Patient Monitor like the Welch Allyn 53NTO Vital Signs Monitor 300 Series (Model 53NTO with Expansion Module).

Purchase the Welch Allyn 53NTO Vital Signs Monitor at our Low Prices by clicking the link below for PayPal.

Welch Allyn Vital Signs Monitor

WE SHIP THE WELCH ALLYN 53NTO USING EITHER FEDEX GROUND OR USPS PRIORITY MAIL

For simple and accurate vital signs assessment or continuous monitoring, the Welch Allyn Vital Signs Monitor 300 Series (Model: Welch Allyn 53NTO) is the definition of advanced monitoring made affordable.

  • – Noninvasive blood pressure (NIBP), pulse rate and MAP
  • – Lightweight and portable with a variety of mounting options
  • – Simple to use LCD display facilitates menu navigation

Includes automatic blood pressure mode, programmable alarms, built-in memory capability & intuitive icons. Plus it Supports adult, pediatric & neonatal patients

More Information on the 53NTO Vital Signs Monitor 300 Series can be found on Welch Allyn’s website by clicking here.

These VSM 300 Series were recently removed from a working federal hospital environment.We have a total of 4 Left that we are listing here on eBay which are all in Good Working Order or your money back.

Once the Manufacturer Warranty Ends and/or the Manufacturer Service Agreement Ends, these devices are no longer used by The Federal Government at the Hospital or Military/Medical Facility. See Attached Photos…They purchase brand New Equipment again with full warranty and service agreement. Then we obtain these devices and pass on the savings to our Medical Customers…YOU!!!

Features:

  • SureBP
  • SureTemp® Plus Thermometry
  • Nellcor® Pulse Oximetry

Includes the following:

(1) Welch Allyn 53NTO VSM 300 Series

(1) Power Adapter

(1) Power Cord

(1) NIBP Hose and (1) Adult Cuff

(1) SpO2 Sensor/Probe

(1) Temp Probe

(1) New Battery



 

This listing is for the Welch Allyn 53NTO Vital Signs Monitor with Accessories as listed above. Contact us if you are interested in buying more than one, have any questions about the listing such as shipping discounts or best offers. Thank You.

CONFIGURATIONS OF THE VSM 300 SERIES FROM WELCH ALLYN

P/N                     Description                                                                             

  • 53000                 NIBP only (includes Pulse Rate and MAP)
  • 5300P                 NIBP/Printer
  • 530T0                 NIBP/Temperature
  • 530TP                 NIBP/Temperature/Printer
  • 53S00                 NIBP/Masimo Pulse Oximetry
  • 53S0P                 NIBP/Masimo Pulse Oximetry/Printer
  • 53ST0                 NIBP/Masimo Pulse Oximetry/Temperature
  • 53STP                 NIBP/Masimo Pulse Oximetry/Temperature/Printer
  • 53N00                NIBP/Nellcor Pulse Oximetry
  • 53N0P                NIBP/Nellcor Pulse Oximetry/Printer
  • 53NT0                NIBP/Nellcor Pulse Oximetry/Temperature
  • 53NTP                NIBP/Nellcor Pulse Oximetry/Temperature/Printer

Vital Signs Monitor 300 Series Manual

Posted on Leave a comment

Belmont 3 Spike Disposable Set 903-00006P

The Belmont 3 Spike Disposable Set 903-00006P

What you have here is The Belmont 3 Spike Disposable Set 903-00006P which includes the Fluid out detector, pump head, air detector, and keep in mind the valve wand are not part of the set.  The EXPIRATION DATE OF THESE ARE 12/31/2018 AND 01/31/2019.
Some of the Features of the 903-00006 The Belmont 3-Spike Disposable Set are as follows:

  • – 120 ml fluid reservoir with 250 micron filter and an hydrophobic filter for air removal
  • – 3-bag spikes
  • – Heat exchanger assembly
  • – Pressure chamber assembly
  • – 54 inch patient line with injection port

 

belmont 3 spike disposable set 903-00006P

Belmont 3 Spike Disposable Set

Consists of 3-bag spikes, 120 ml reservoir chamber with coarse filter, pump tubing, heat exchanger, pressure chamber with air debubbler, a 54 inch patient line, and an interface to temperature and pressure sensors. The set is ready to use to warm and rapidly infuse blood or replacement fluids into patients. It also consists of swivel luer connectors allowing for rapid replacement of the fluid reservoir with the optional 3.0 Liter Reservoir. It is to be used with the Belmont® Rapid Infuser, FMS2000 and RI-2 or also known as the most recent one from Belmont…The Belmont Rapid Infuser 2 only.

THE UNIVERSAL Belmont 3 Spike Disposable Set can be found under Part # or Reference # 903-00006P

If you would like to order this before we are all out of stock again, please do so by seeing the PayPal order info below.

 


Quantity



 

FREE SHIPPING THROUGH USPS PRIORITY MAIL OR FEDEX GROUND

CONTENTS:

ONE (1) UNIVERSAL Belmont 3 Spike Disposable Set REF 903-00006P

FOR USE WITH BELMONT MS2000 FLUID MANAGEMENT SYSTEM – The Belmont 3 Spike Disposable Set is a Sterile single patient use disposable set containing a special heat exchanger, fluid reservoir, patient line and 3 bag spikes.  DIRECTIONS: TO BE USED WITH THE BELMONT RAPID INFUSER (RAPID INFUSER OR RAPID INFUSER 2 RI-2

belmont 3 spike disposable set 903-00006P

For more information you can visit the Manufacturer Belmont Instruments.

See the device and Disposables on Belmont Website by clicking on the link just below this line

Belmont Disposable Set

Posted on Leave a comment

Welch Allyn Propaq Encore 206EL Patient Monitor

Welch Allyn Propaq Encore 206 EMPSC Patient Monitor ETCO2 Capnography SpO2 NIBP

The Welch Allyn Propaq Encore 206 EL Patient Monitor is designed specifically for the traveling anesthesiologist, emergency room, and critical care transport. This multi-parameter monitor features ECG, SPO2, IBP, and NIBP with Printer / Recorder. The Propaq has a built-in bed rail hook and integral battery. The monitor is light weight, fast, portable and easy-to-use.

Welch Allyn Propaq Encore

The Propaq Encore Expansion Module attaches to the monitor and houses additional capabilities. The Expansion Module can be fitted with the SpO2, CO2, and Printer options.

The Propaq Encore is intended for ECG monitoring of either a five-lead or three-lead configuration, including the Marriott configuration 1 (MCL1 requires all three electrodes). The five lead configuration can derive one of seven user-selected signals, Lead I, II, III, aVR, aVL, aVF, or V.

The Impedance Pneumography (RESP) Option detects the rate or absence of respiratory effort, and is configured with the Pulse Oximetry option.

  • Features

    • Continuous monitoring in challenging transport environments
    • Custom selection of up to 4 viewable waveforms
    • Adult, pediatric and neonatal modes for customized monitoring
    • Offers durability and long battery life
    • Optional connectivity to Acuity® Central Station for truly flexible monitoring

Welch Allyn Propaq Encore 206EL

  • Welch Allyn Propaq Encore 206 EL Monitor w/SPO2 and End Tidal CO2 Capnography Includes Hard Case and The Following Accessories Listed Below:
    • Welch Allyn Propaq Encore 206 EL Monitor Option Number 229
    • ConMed ECG Electrode REF 1590-030
    • Welch Allyn Adult NIBP Hose 10 foot REF 008-0238-00-REV-B1
    • Welch Allyn Temperature Sensor REF 008-0230-00
    • Welch Allyn Temperature Cable 10 foot Extension REF 008-0235-00
    • Welch Allyn ECG Cable, 5 Lead, Attached Lead Wires REF 008-0313-00
    • Welch Allyn Thigh Cuff REF REUSE-13-1MQ
    • Welch Allyn Adult Cuff REF REUSE-12-1MQ
    • Welch Allyn Child Cuff REF REUSE-09-1MQ
    • Propaq Encore Reference Guide Ref 810-2106-02
    • Welch Allyn Power Supply REF 503-0054-02
    • Welch Allyn Lead-Acid Battery Rechargeable REF 008-0125-00
    • Propaq Encore Software CD and Service Manual CD
    • OxiMax DS-100A Durasensor Adult Oxygen Sensor
    • Nellcor Sensor Extension Cable REF DEC8
    • Adult O2/EtCO2 CANNULA
    • Welch Allyn Cords and Accessories as seen in Photo’s


 

You can find more information from the manufacturers website by clicking here

Posted on Leave a comment

Linksys USB2HUB4 Proconnect USB 4-Port Hub

Linksys USB2HUB4 also known as Linksys ProConnect USB 4-Port Hub by CISCO

LINKSYS USB2HUB4

Linksys USB2HUB4

Connect up to four Hi-Speed USB 2.0 or original 1.1 devices to a single USB port when using the Linksys USB2HUB4 ! When the hub connects USB 2.0 devices to a USB 2.0 port, you get data rates up to 480Mbps – perfect for graphics, multimedia, or gaming applications. The Plug-and-Play USB 4-Port Hub is fully backward compatible with earlier USB devices. It is also hot-swappable, so you can connect or disconnect USB devices on the fly. The Hub supports all USB devices, including digital cameras, scanners, game controllers, keyboards, portable data storage, mice, modems, printers, and more. To add even more USB peripherals, you can daisy-chain the USB 4-Port Hub to additional Hubs, up to a maximum of 127 USB devices.
Product Identifiers
Brand Linksys
Model USB 4-Port Hub
MPN USB2HUB4
UPC 745883552542
Key Features
Form Factor External
Ports Qty 4
Data Transfer Rate 480 Mbps
Data Link Protocol Hi-Speed USB
Compatibility PC
Features
Status Indicators Power, active
Networking
Networking Type Hub
Connectivity Technology Wired
Connectors
Interfaces 4 x Hi-Speed USB – 4 pin USB Type A
Power
Power Supply Power adapter – external

Purchase Online Now through Amazon

Expandability
The hub allows you to expand your USB connections. Users often need to connect external drives, iPods, digital video cameras, memory card readers and other external devices to their computer via USB connections. Adding a hub will allow you to make these connections without constantly swapping cables.
Hot Swappable
USB devices are often hot swappable. This hub fully supports that capability, allowing you to connect and disconnect devices without powering down your computer.
Self Powered
An AC adapter is included to power the hub, allowing you to provide ample power to your external devices when they are connected to your computer.

Linksys USB2HUB4 Specs

Interface – Connectors 4x USB 2.0
1x USB 2.0 for Connection to Computer
Data Transfer Rate 60 MB/sec
LED Indicators Yes
Bus/Host Powered Power Adapter Included
System Requirements
Computer USB 2.0 Port
Operating System Operating System Independent
Posted on Leave a comment

Heavy-Duty SMS Shoe Cover

SMS Shoe Covers

These Cardinal Health SMS Shoe Covers provide increased strength for use in low to moderate fluid settings.

Here is a Line of fluid resistant SMS shoe covers is constructed of spunbond meltblown spunbond (SMS) material for extra strength and fluid resistance. These are Heavy-duty shoe covers and come with skid resistant tread. They are also 100% latex free. Using the photo below for reference, one should note that these are the Shoe Covers 5852, which have skid-resistant tread.

You can purchase these on Amazon by going to our Storefront. Just click on the following link and you’ll be directed right to it… Iteleti @ Amazon.com

 

All the Convertors Shoe Covers by Cardinal Health are the Color Blue. Question: What is SMS? Answer: SMS Shoe Covers Consists of meltblown Polypropylene between layers of spunbond polypropylene. It is strong and breathable, providing a blend of protection and comfort. Appropriate for low to moderate fluid settings.

SMS Shoe Covers Part # 5852 Convertors Premium Shoe Covers are Non-skid, Universal Size, and are considered Heavy-duty! See the information we provided in the photo below talking about these SMS Shoe Covers and explains what SMS is.

SMS Shoe Covers

These 5852 Fluid-Resistant Shoe Covers, Skid-Resistant Tread (Universal) are constructed of materials ranging from basic spunbonded polypropylene to polyethylene-coated SMS to accommodate a wide range of intended uses. The Dura-Trac shoe cover is constructed of poly-film, which helps minimize lint and enhance environment cleanliness. Excellent anti-skid protection makes this shoe cover ideal for the challenges of dry and wet conditions.

Fluid-Resistant SMS Shoe Covers by Cardinal Health Medical Products

Dupont Personal Protection, No. 5852 Shoe Cover are SMS Shoe covers. In the class of Heavy-Duty and are Fluid-Resistant. These convertors have Increased fluid resistance and strength, while being 100% latex-free. Also sought after for their Skid-Resistant Tread and the fact they are of Universal Size. Available in the Color Blue only.

Posted on Leave a comment

Welch Allyn Rolling Stand with Basket

Welch Allyn Rolling Stand with Basket for Welch Allyn Patient Monitors.

Rolling Stand with Basket

This medical stand is compatible with the Welch Allyn SPOT 420 Series Patient Monitor, Welch Allyn SPOT LXi Monitor, Welch Allyn VSM 300 or 300 Series Vital Signs Monitor, and Connex Vital Signs Monitor.

The mounting hardware is Same as Welch Allyn Rolling Stand with Basket or Welch Allyn Part # 4800-60, 4700-60 and 4200-60.

rolling stand with basket for welch allyn monitor

We have Refurbished these with the Mounting Hardware to fit the above patient monitor and medical devices.

We offer FREE SHIPPING with the Purchase of this Mobile Stand in the USA.

Posted on 6 Comments

AutoMedx SAVe Simplified Automated Ventilator

AutoMedx SAVe Simplified Automated Ventilator 600×10

The AutomedX SAVe Simplified Automated Ventilator is designed to be quickly deployed in a pre-hospital environment by a BLS or ALS provider, a medic or any first responder with limited training. It is lightweight, rugged, hands-free, and contains a number of alarms and safety features not found in similarly priced devices. The SAVe delivers an AHA compliant tidal volume (600mL) at a fixed respiratory rate (10 bpm) which removes any guesswork and reduces errors.

SAVe Ventilator
Available Now!@ One Left as of June 10th, 2018
Photo of Actual Item
Photo of Actual Item
Comes in the Manuf. Box!
Comes in the Manuf. Box!

 

Portable, easy to use, safe and cost effective the SAVe is the ideal alternative to bag-valve-masks or expensive transport ventilators.

This Ventilator is in great condition and great working order. Also been kept in storage and has been handled only to maintain the devices functionality per annum. This device was last Calibrated on 01/2011. The Original SAVe Hard Case, ResQstrap, Ventilation Mask, and Manual are NOT INCLUDED (Items can be inexpensively replaced direct from the Manufacturer AutoMedx if you choose to, directly).

AutomedX SAVe Simplified Automated Ventilator

Purchase NEW or USED AutoMedx SAVe Ventilators on iteleti.com or go to biomedycle.com and shop around

 

The Ventilator itself and Listed Accessories below all come in a PELICAN HARDIGG hard case equipped with a Halkey Roberts 790 Dual Action Breather Valve (case has some light scratches and scuffs).

AutoMedx SAVe Simplified Automated Ventilator 600X10

  • Simplified Automated Ventilator (SAVe) – Primary Unit
  • Single-Use Patient Circuit and Pressure Tubing x 2
  • External power supply and AC plug
  • Supplemental O2 Tubing
  • Waterproof, Military Quality, Pelican Hardigg Hard Case
  • Training Slides (in lieu of Manual)

The device addresses the dangers associated with bagging patients and frees up a responder to address other injuries, perform compressions, attend to other patients or further assist in transporting the patient.

The ventilator is completely self-contained, weighs only 3 pounds and does not require a compressed gas source. It can be used with a mask or a secure airway. Low pressure supplemental oxygen can be used if desired. The SAVe will deliver ambient air for up to 5.5 hours on a single battery charge and may be recharged from a standard AC outlet. It is a set flow, time cycled, pressure limited (38 cmH2O) device.

Parameters:

Ventilation Mode: Positive Pressure ventilation
Tidal Volume: 600ml
FIO2: Ambient air (21%) or supplemental oxygen (21 to 62%) Peak Inspiratory
Pressure: 38cmH20
Inspiratory / Expiratory Time: 2.25 seconds / 3.85 seconds
Breathing Rate: 10BPM (fixed)
Alarms: Low pressure (disconnect), High pressure (blockage) and Low battery.
Alarm Mute: Yes (on – off switch)
Operating Time: 5.5 Hours on Lead – Acid rechargeable battery or continuous on AC power
Dimensions: 16.5 x 16.9 x 6.3cms
Weight: 1.3kgs (Ventilator)

The AutoMedx SAVe Simplified Automated Ventilator 600X10 (SAVe) mitigates the potential for injury, reduces operator error, complies with guidelines and improves a medical responder’s ability to perform other critical task. It is ideally suited for situations where the use of pressurized gas is inadvisable or unavailable, or where size, weight, ease of use and portability are a consideration. Forward deployed field medics, mass casualty incident coordinators within the Department of Homeland Security and EMS professionals will find the device well suited to their needs.

AutoMedx SAVe Simplified Automated Ventilator

Success Stories

  • Afghanistan Battlefield
  • The SAVe was used post operatively in Kenya Kenya
  • South African Dignitary Evacuation

Benefits and Features:

Easy to Use:
• Single knob operation
• Low Training Requirements
• Hands-Free

Versatile:
• Allows Spontaneous Breathing
• Accepts Up to 6LPM of supplemental O2
• Powered by Rechargeable Lead-Acid Battery or Electrical Outlet

Safe:
• Single Tidal Volume and Respiratory Rate Reduces Chance of Operator Error
• Tidal Volume = 600 mL
• Breaths / Minute = 10
• EtCO2 Detector
• No Compressed Gas Required

Intelligent Design:
• Detects Blockage and Disconnects
• Fail-Safe Mechanisms and Visual/Audible Alarms
• Up to 5.5 Hours per Charge

Use Anywhere:
• Rugged, Compact Design (6.5 x 6.25 x 2.5 inches)
• Long shelf life and durability
• Lightweight (3.1 pounds)
• Self-Contained

AutoMedx SAVe

 

This item is currently unavailable

Posted on

Impact Uni-Vent 754M Eagle Portable Volume Ventilator

Get the Impact Uni-Vent 754M Eagle Portable Volume Ventilator comes with a Pelican/Hardigg Hard Case and also includes the soft case for the Impact Uni-vent 754M.

Impact Uni-Vent 754M Eagle This Impact Uni-Vent 754M Eagle Ventilator is in Excellent Condition. We acquired this unit from the U.S. Military. The Ventilator was able to run off of the New Battery Power and External Power using enclosed Power Supply when plugged in to a 110V Electrical Outlet. Unit was hooked up to a Ventilator Circuit. 100% Functional. That’s the Extent of our Testing Due to Device needing PM (Preventive Maintenance) including the calibration clock, which is Required to be Reset every 12 months.

Device has not been in use since Calibration was Performed by The Manufacturer in July of 2016. See Photos for More Info! Includes 4 Pages of Summary Inspection Results and Calibration Paperwork from D.O.D. and Manufacturer.

NSN:  6530-01-464-0267
S/N:    0306199

We Guarantee this Unit to Function as Described. All Photos are of the Actual Unit that you will receive. Included with the Impact Uni-vent 754M is as follows:

  • ·       334-0020-00 Strap, Velcro (x2)
  • ·       402-0014-00 Case, Padded, Ventilator and ACC
  • ·       800-0754-01 Ventilator
  • ·       820-0067-00 Ventilator Circuit, Disposable
  • ·       825-0002-00 Hose, Oxygen
  • ·       825-0004-00 Hose, Air
  • ·       703-0754-03 ASSY, DC Power Cable

Model 754M Features:

The Impact Uni-vent Eagle 754M is completely self-contained and requires no outside gas. Featuring an internal compressor and blender, it offers PEEP with controlled assist, SIMV, Intubated CPAP, and CMV (for apnea backup) ventilation modes. Bright graphic LCD provides monitoring and alarm settings. An interactive demo/teaching mode assures fast start up sequence in as little as three steps. EMI/RFI and Air Medical certified.

Impact Uni-vent 754

Features & Specifications

  • Deliverable Gas(es) Air (Internal Compressor, External 50-PSI); Oxygen (External 50-PSI)
  • Tidal Volume Range 0 to 3000 mL
  • I:E Ratio 1:1 Preset, Adjustable 1:1 to 1:599
  • Sensitivity Default, 1.5 to 2.0 cmH2O; Adjustable, 1.0 to 6.0 cmH2O
  • Flow Rate Adjustable, 0 to approximately 60 LPM (0 to approximately 1000 ml/sec)
  • Ventilation Rate Adjustable, 1 to 150 bpm, in 1bpm increments (±1 digit on the display panel)
  • Inspiration Time Adjustable, 0.1 to 3 sec, in 0.1 sec increments (±1 digit on the display panel); 1:2 I:E RATION preset
  • FiO2 Adjustable, 21% to 100% (Internal Air/Oxygen Mixer), resolution in 1% increments, accurate to within ±10%
  • Low Pressure Alarm Adjustable, 0 to 50 cmH2O, in 1 cmH2O increments (±1 digit on the display panel)
  • High Pressure Alarm Adjustable, 15 to 100 cmH2O, in 1 cmH2O increments (±1 digit on the display panel)
  • Peek Inspiratory Pressure Relief Adjustable, 15 to 100 cmH2O, in 1 cmH2O increments (±1 digit on the display panel)
  • Pressure Plateau Range, 5 to 90 cmH2O (referenced to HIGH PRESSURE ALARM set-point)
  • Assist/SIMV Sensitivity Default, 1.5 to 2.0cmH2Obellow end pressure
  • PEEP Program range 1 to 20 cmH2O, in 1 cmH2O increments (±1 digit on the display panel)
  • Sigh Occurs once every 100-ventilations or 7-minutes, whichever occurs first. Sigh duration = 150% Vt (truncated to a combined maximum of 3 seconds)
  • Liquid Crystal Display External Air, Sigh, PEEP, Pressure Plateau, High-Pressure Alarm Setting, Low-Pressure Alarm Setting, Ventilation Rate, Inspiration time/I:E Ratio, Tidal Volume, Air/Oxygen Mixer, Mode, Inspiration/Exhalation, Power, Pear Airway Pressure, Mean Airway Pressure, Digital Bar Graph, High/Low, Airway Pressure Alarm Setpoint Indicators, Paw.
  • LED Indicators Charge/Alarm/System Failure
  • LED Digital Bar Graph Range -10 to 100 cmH2O
  • LCD Alarm Display Battery Low, External Power Low, Low Pressure, O2 Low/Fail, Disconnect, High Pressure, Apnea, Vt, High PEEP, Ext Air Low/Fail, FIO2, Inverse I/E, Comp, Pressure Alarm Settings, Transducer Calibration, Transducer Calibration Abort, System Failure, Ventilator Fail, Inspiration Time Truncated to 3-seconds, Plateau Volume, Preventative Maintenance Due, Vt Settings, Extended Non-Use/ Storage, External Power Failure.

The Impact Uni-vent 754M is currently unavailable

 

 

 

If the item is to be used in conjunction with patient care and/or diagnosis, it is responsibility of the buyer to get proper certifications/licenses for use of the item. It would be highly recommended and wise to have a bio-med completely check the devices performance, safety parameters before actual patient use and/or diagnosis. This Item is guaranteed to be as we represent herein. Ask, Should you have questions