The SMEED Special Medical Emergency Evacuation Device

The SMEED Special Medical Emergency Evacuation Device by Impact Instrumentation is a Medical Platform that is designed to secure commercial, off-the-shelf monitors, infusion pumps, ventilators, and similar equipment to the standard NATO liter. This system fits the most commonly used equipment in commercial use and the U.S. military inventory, and is easily customized to fit other devices.

SMEED Special Medical Emergency Evacuation Device
Side of Image of the SMEED
Impact Instrumentation SMEED

The SMEED Special Medical Emergency Evacuation Device system is rugged, lightweight, inexpensive; compatible with current and future commercial devices; rapidly customizable to meet individual customer and patient needs; and perfect for use as mobile platform in an Ambulance, Emergency Vehicle or anytime you need equipment directly next to a patient-fits on top of a stretch. This Critical Care Platform is also approved for in-flight use aboard aircraft.

This Item is Very Good Condition. Listed as “A” Condition or Serviceable. Which may have a Medical Device Label (Created Annually the Label is Updated to satisfy Joint Commission Requirements).

You can Purchase these in USED Condition Today!!!

See Below to Purchase using PayPal

The SMEED (Special Medical Emergency Evacuation Device) Platform is designed to secure commercial, off-the-shelf monitors, infusion pumps, ventilators, and similar equipment to the standard NATO liter. This system fits the most commonly used equipment in commercial use and the U.S. military inventory, and is easily customized to fit other devices.

When not in use, the Special Medical Emergency Evacuation Device folds into a briefcase-like package. Made by Impact Instrumentation, the SMEED Accommodates any reasonable medical equipment load and also folds to a briefcase-like package.

Overall height of the Impact Instrumentation SMEED Platform in its fully extended position with full equipment load does not exceed a height of 54 cm. measurements are obtained from the top of the litter pole to the top edge of a Propaq Monitor.

Retail Asking Price for these when the Original Owner Purchased these through Impact Instrumentation in March of 2010 was $1,788 Each at Bulk Discount.

We are Selling these without accessory / attachments and with only the SMEED PLATFORM ITSELF as seen below in photos.

The Impact SMEED System Part Number 800-0903-02 will include the following:

  • 703-0903-10       Critical Care Platform
  • 703-0903-11       Carry-All Case with Foam Inserts
Quantity

PURCHASE THE SMEED DEVICE BY ITSELF WITHOUT THE ACCESSORY OPTIONS FOR ONLY $420.00

Saros 15 Oxygen Concentrator

Purchase the Saros 15 Oxygen Concentrator which is designed to replace oxygen cylinders and large oxygen generation equipment used in field hospitals, casualty evacuation, en route care and on the battlefield. These units Stand at 33 inches tall and weight in at 46 lbs.

This Portable Oxygen Concentrator delivers 0.5-15 LPM of Oxygen at Continuous and Pulse Dose Settings. You can see more device information like the Access GUDID by clicking here.

The Caire Saros 15 Oxygen Concentrator was originally developed for the U.S. Air Force to generate up to 15 LPM oxygen, and operate via wall outlet (AC) power. This Oxygen Concentrator can endure extreme temperatures and harsh conditions of sand, dust, salt fog, vehicle and aircraft vibration, which are all common environments to modern military operations.

Because of this, the unit is perfect for ground-based military medical assemblages, tactical combat casualty care, emergency and disaster preparedness, en route care, and reduces the burden of scheduling and transporting oxygen to patients.

With the SAROS 15 one doesn’t have to worry about any of the risks and logistical concerns that oxygen cylinders pose. That has been solved by its simple and sustainable design which eliminates the logistics of creating oxygen storage and filling tanks on a regular cadence.

What you are getting is a simple yet sturdy O2 Concentrator that can endure through harsh weather and anything the military can through at it for Half the price of Wholesale cost when you purchase the Saros 15 from Iteleti Medical. You Device comes in a very rugged Pelican Case with wheels, a user manual and a maintenance manual which perfect for your BioMed Tech’s.

Ships for FREE in the Continental US (48) States and even Ships Internationally at the Going rate. We suggest you familiar rise yourself with the International Carrier in your country and when obtaining quotes, the shipper address, which is us, will be shipping from Oklahoma City, Oklahoma 73160. The dimensions of the Package are 48″ x 24″ x 24″ and figure shipping weight is 90 pounds.

SOLD OUT

AutoMedx SAVe Simplified Automated Ventilator

AutoMedx SAVe Simplified Automated Ventilator 600×10

The AutomedX SAVe Simplified Automated Ventilator is designed to be quickly deployed in a pre-hospital environment by a BLS or ALS provider, a medic or any first responder with limited training. It is lightweight, rugged, hands-free, and contains a number of alarms and safety features not found in similarly priced devices. The SAVe delivers an AHA compliant tidal volume (600mL) at a fixed respiratory rate (10 bpm) which removes any guesswork and reduces errors.

automedx save

Portable, easy to use, safe and cost effective the SAVe is the ideal alternative to bag-valve-masks or expensive transport ventilators.

This Ventilator is in great condition and great working order. Also been kept in storage and has been handled only to maintain the devices functionality per annum when it was in use with the US Government. This is the SAVe I Ventilator and includes all the Accessories needed in order to use as well as a Hard Case to keep it SAFE

AutoMedx SAVe Simplified Automated Ventilator 600X10

Purchase NEW or USED AutoMedx SAVe Ventilators on iteleti.com or go to biomedycle.com and shop around

  • Simplified Automated Ventilator (SAVe) – Primary Unit
  • Single-Use Patient Circuit and Pressure Tubing x 2
  • External power supply and AC plug
  • Supplemental O2 Tubing
  • Waterproof, Military Quality, Pelican Hardigg Hard Case
  • Training Slides (in lieu of Manual)

The device addresses the dangers associated with bagging patients and frees up a responder to address other injuries, perform compressions, attend to other patients or further assist in transporting the patient.

SAVe Ventilator

The Ventilator itself and Listed Accessories below all come in a PELICAN HARDIGG hard case.

The ventilator is completely self-contained, weighs only 3 pounds and does not require a compressed gas source. It can be used with a mask or a secure airway. Low pressure supplemental oxygen can be used if desired. The SAVe will deliver ambient air for up to 5.5 hours on a single battery charge and may be recharged from a standard AC outlet. It is a set flow, time cycled, pressure limited (38 cmH2O) device.

Parameters:

Ventilation Mode: Positive Pressure ventilation
Tidal Volume: 600ml
FIO2: Ambient air (21%) or supplemental oxygen (21 to 62%) Peak Inspiratory
Pressure: 38cmH20
Inspiratory / Expiratory Time: 2.25 seconds / 3.85 seconds
Breathing Rate: 10BPM (fixed)
Alarms: Low pressure (disconnect), High pressure (blockage) and Low battery.
Alarm Mute: Yes (on – off switch)
Operating Time: 5.5 Hours on Lead – Acid rechargeable battery or continuous on AC power
Dimensions: 16.5 x 16.9 x 6.3cms
Weight: 1.3kgs (Ventilator)

The AutoMedx SAVe Simplified Automated Ventilator 600X10 (SAVe) mitigates the potential for injury, reduces operator error, complies with guidelines and improves a medical responder’s ability to perform other critical task. It is ideally suited for situations where the use of pressurized gas is inadvisable or unavailable, or where size, weight, ease of use and portability are a consideration. Forward deployed field medics, mass casualty incident coordinators within the Department of Homeland Security and EMS professionals will find the device well suited to their needs.

AutoMedx SAVe Simplified Automated Ventilator

Success Stories

  • Afghanistan Battlefield
  • The SAVe was used post operatively in Kenya Kenya
  • South African Dignitary Evacuation

Benefits and Features:

Easy to Use:
• Single knob operation
• Low Training Requirements
• Hands-Free

Versatile:
• Allows Spontaneous Breathing
• Accepts Up to 6LPM of supplemental O2
• Powered by Rechargeable Lead-Acid Battery or Electrical Outlet

Safe:
• Single Tidal Volume and Respiratory Rate Reduces Chance of Operator Error
• Tidal Volume = 600 mL
• Breaths / Minute = 10
• EtCO2 Detector
• No Compressed Gas Required

Intelligent Design:
• Detects Blockage and Disconnects
• Fail-Safe Mechanisms and Visual/Audible Alarms
• Up to 5.5 Hours per Charge

Use Anywhere:
• Rugged, Compact Design (6.5 x 6.25 x 2.5 inches)
• Long shelf life and durability
• Lightweight (3.1 pounds)
• Self-Contained

AutoMedX SAVe ACCESSORY KIT

Purchase the Accessory Kit for $284.95 + Shipping which includes the following:

1 Battery Charger External power supply and AC plug for North America or European Standard Outlet
1 Single-Use Patient Circuit and Pressure Tubing
1 Supplemental Oxygen Tubing
1 Oxygen Mask

PTLOX at Iteleti.com

PTLOX Portable Therapeutic Liquid Oxygen System by ESSEX

PTLOX Portable Therapeutic Liquid Oxygen by ESSEX INDUSTRIES

Also known as Portable Therapeutic LOX, PTLOX, and Essex CRU-87/U Portable Therapeutic Liquid Oxygen System.

NSN 6530-01-222-9494

MANUFACTURER PART NUMBER

or P/N 50C-0021-1

(MPN CRU-87/U OXYGEN CONVERTER)

The PTLOX by ESSEX is a PORTABLE LIQUID OXYGEN SYSTEM

The PTLOX Portable Therapeutic Liquid Oxygen System is a low pressure portable 10 liter liquid oxygen storage and gaseous delivery system.

 FDA Life Support device 510(k) number K880183 (PTLOX)

  • Indicator Power runs on two (2) 9-Volt Alkaline Batteries
  • Three (3) Schrader Quick Disconnect Ports

CRU-50/A Fill Valve Accessory Kit (P/N 50C-0021-0001-1) Includes:

  •      Three (3) 20’ Medical Grade Hoses
  •      Three (3) Flow Control Valves: 0 to 15 LPM with 11 Settings (0.5, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15 LPM)
  •      Three (3) Humidifier Bottles

The ESSEX PORTABLE LIQUID OXYGEN SYSTEM PTLOX Weighs in at 50 pounds when empty or at around 80 pounds when full. Portable, the PTLOX can be carried by one or two people or mounted in vehicle, vessel or aircraft.

PTLOX Portable Therapeutic Liquid Oxygen System by ESSEX

(Click link below)

MORE INFO HERE AT ESSEX INDUSTRIES

PTLOX

SPECIFICATIONS

Capacity: 10 Liters
Dimensions (W”xL”xH”): 18.2 x 20 x 24
Weight, Full: 80 lbs
Weight, Empty: 55 lbs
Total Gaseous Volume: 8,600 Liters
Flow Rate: 45 LPM
System Internal Pressure: 85-120 PSIG
Delivery/Outlet Pressure: 50 ± 5
Operating Temperature: 40° F to 140° F
  • P/N 50C-0021-1
  • NSN: 3655-01-222-9494

CONVERTER-STORAGE UNIT FOR USE IN TO SUPPLY OXYGEN ON THERAPEUTIC BASIS(93-100%) TO MAX OF 3 PATIENTS AT A RATE OF 15 LITERS PER MINUTE

INCLUDES: 

  • CARRYING CASE
  • THREE 20 FT HOSES
  • FLOW METERS
  • HUMIDIFICATION BOTTLES
  • 18.2″ D x 15.0″ W x 22.5″ H

Liquid Oxygen

 


Purchase a PTLOX Today for $569.99 plus $69.99 Shipping

***** Just click on the PayPal Logo Below *****

Mobile X-Ray Barrier Radiation Protection

Clear Pb Acrylic Mobile X-Ray Barrier features optically clear and shatter resistant lead acrylic windows. This portable, full-body radiation barrier protects against secondary radiation. Plus, it travels easily on four-caster locking base steel legs.  These barriers are for use around any imaging procedures using ionizing radiation, e.g., fluoroscopy, x-ray, CT, mammography.

Diagnostic x-ray procedures frequently require working personnel to remain in the examination room, where they are subject to exposure from secondary radiation. The clear leaded acrylic barrier can provide total-body x-ray shielding during extended procedures. This clear acrylic barrier rests on an opaque lower panel with smooth-rolling casters giving the barrier great mobility. Its full clear window gives you a modern alternative to old fashioned Mobile x-ray barrier. The acrylic lead barrier is shipped unassembled but can be easily assembled using a screwdriver and wrench.

Mobile X-Ray Barrier
Purchase this Mobile X-Ray Barrier from Fluke Biomedical for your Radiation Protection needs. This Mobile Lead Barrier is Model 56-603 (Regular Clear Pb Barrier).

CLICK BELOW for SAFE & SECURE TRANSACTION on PayPal’s Secured Site.

SORRY THIS ITEM IS NO LONGER AVAILABLE

Introduction:

Your patients have chosen you as their healthcare provider based on your years of experience, expertise, and reputation. It stands to reason then, that you should demand the same qualities from your radiation protection product supplier.

Only the safest, most effective, and durable products are incorporated into our product line. You can count on us to understand your individual radiation protection requirements and stand behind every product we sell – before, during, and after the sale.

Anesthesia healthcare providers generally remain in close proximity to the patient for easy monitoring and administration of anesthesia. With limited space to work in, a special barrier is needed to easily maneuver in and out of tight spots. In fact, innovative designed barriers provide ideal radiation protection in virtually every type of setting.

Applications:

Ideal for use in Operating Rooms, Special Procedure Suites and Cardiac Cath Labs. The Stainless Steel Hardware Mobile Barriers are the perfect fit in any imaging room due to their 30 inch width and easy maneuverability.

Features:

  • 0.5mm lead equivalent lighter weight leaded acrylic window
  • 2.0mm lead equivalent opaque panels of solid, leaded x-ray protection with contoured sides
  • Large 24″ H x 30″ W acrylic window for easy viewing
  • Travels easily on a four caster locking base steel legs
  • It is recommended that two people move the barrier together at all times

Specifications:

  • Overall Dimensions:                                                            75″ H x 33.5″ W x 30″ L
  • Acylic Window Dimensions:                                                24″ H x 30″ W
  • Opaque Panel Dimensions:                                               48″ H x 30″ W
  • Total Caster Height (including insertion area):                4.25″, Caster Wheel Diameter: 3.50″
  • Latex-Free

CLEAR-Pb Lead Mobile X-Ray Barrier

  • This rugged mobile barrier can easily fit into the most confining of spaces and provides exceptional visibility.
  • CLEAR-Pb® Shatter-Resistant Lead-Plastic X-Ray Shielding
  • Clear-PB x-ray shielding is a lead-impregnated, transparent, plastic sheet that contains 30% lead by weight.
Mobile X-Ray Barrier Assembly Instructions Page 1 of 2
Mobile X-Ray Barrier Assembly Instructions Page 2 of 2

Welch Allyn Spot Vital Signs Monitor

Welch Allyn Spot Vital Signs Monitor 42NTB-E1 NIBP, Nellcor SpO2, SureTemp, Pulse Rate, MAP 

The Welch Allyn Spot 42NTB-E1 Multiparameter Vital Signs Monitor is Available for purchase. These units have been recently removed from a working environment and include the following parameters:

– Nellcor Pulse Oximetry (SpO2), 

– Noninvasive Blood Pressure (NIBP), 

– Pulse Rate and Map, 

– SureTemp Plus Thermometry.

The Welch Allyn Spot Vital Signs® is one of the most cost-effective multi-parameter devices on the market that come with a variety of mounting options. Making the Spot Quick, Easy to Use and Affordably Priced.

Welch Allyn Spot Vital Signs has made its mark in ambulatory and acute care settings for its accuracy, durability and cost-effectiveness. The fully automated, multiparameter Spot Vital Signs has become the device of choice for frontline caregivers world-wide.

Check vital signs rapidly, automatically and affordably with the Spot Vital Signs

Portable—carry it, wheel it, or mount it. Big, bright, easy-to-read LCD screen.

Fully upgradeable to meet your changing needs with an Integrated long-life battery which enhances device portability!

INCLUDES THE FOLLOWING:

  • (1)     Welch Allyn Spot Vital Signs Monitor 42NTB-E1
  • (1)     Welch Allyn Oral Temperature Probe 
  • (1)     Box of Temperature Probe Covers
  • (1)     Blood Pressure Hose with Connector for Cuff
  • (1)     Blood Pressure Cuff 
  • (1)     AC Transformer (Power Supply)
  • (1)     Hospital Grade Power Cord

*Does NOT Include The Welch Allyn Mobile Stand Which is AVAILABLE but it is SOLD SEPARATELY. Click here to see the Mobile Stands we have for you!

FOR YOUR CONVENIENCE WE HAVE MADE A LIST OF THE CONFIGURATIONS FOR THE SPOT VITAL SIGNS MONITOR

Model  Description of Parameters 
 
4200B-E1
Welch Allyn Spot Vital Signs Device with Non-invasive Blood Pressure, Pulse Rate, MAP 
 
420TB-E1
 Welch Allyn Spot Vital Signs Device withSureTemp Thermometry, Non- invasive Blood Pressure, Pulse Rate, MAP 
 
42N0B-E1      
 *** Welch Allyn Spot Vital Signs Device withNellcor SpO2, Non-invasive Blood Pressure, Pulse Rate, MAP
 42NTB-E1  
Spot Vital Signs Device with Nellcor SpO2, SureTemp Thermometry, Non-invasive Blood Pressure, Pulse Rate, MAP 
42M0B-E1  
Welch Allyn Spot Vital Signs Device withMasimo SpO2, Non-invasive Blood Pressure, Pulse Rate, MAP

CLICK HERE to Buy a Welch Allyn Spot Vital Signs Monitor from ITELETI MEDICAL on Amazon.com

portable liquid oxygen unit essex mods

Portable Liquid Oxygen Unit Essex MODS

The only Portable Liquid Oxygen Unit of its kind Manufactured by Essex Cryogenics called the Mass Oxygen Distribution System or MODS, is an Emergency Oxygen System for the Masses. The MODS is the only Medical Grade Oxygen Delivery System that can be immediately deployed and set-up anywhere!

This low pressure, portable 75 liter liquid oxygen storage and gaseous distribution system is capable of supplying oxygen to as many as 150 patients at the same time through the use of Patient Distribution Kits, PODS, or a Linear Patient Distribution Kit (LPDK). Which sole purpose is to provide the additional lines to distribute oxygen to patients.

Capable of delivering oxygen indefinitely by alternating the oxygen from one VGL (Vertical Gas Liquid) Cylinder / VGL Connection to the other VGL Connection / VGL Cylinder.

Dual vaporizers allow switching immediately from one external source to another. Thus, breathing oxygen is seamlessly and continuously provided without interruption even after the relatively immense on board LOX (Liquid Oxygen) is used. Moreover, the system provides an ability to fill/refill on board LOX while simultaneously delivering oxygen to patients, again without interruption.

The use of a dual coil heat exchanger means that frost build-up on the heat exchanger does not interrupt operation.

The low temperature caution alarm and outlet gas pressure warning alarm provide protection to patient from cold oxygen and from loss of pressure no matter whether few or many patients are using the system.

The battery-driven microprocessor alarms with pressure and temperature alarming with outlet pressure signaling alert to the need for VGL/source change-over.

The large 75-liter on board LOX storage provides a hospital-type flow of many hours before supplementing, as by VGL resupply, will be needed.

Safe and effective mass distribution of breathing oxygen is thus assured in a situation such as a mass casualty incident where many patients need emergency oxygen in a location where, for example, patients, even if widely located about the location, will be given medical attention for an indefinite period whether of a few hours or many hours. A great need is thereby fulfilled.

After use, the shutoff/vent feature allows the outlet to be shut off and vent all hoses and accessories at the same time, so safely allowing system disassembly.

The MODS Portable Liquid Oxygen Unit is an FDA Class II Device with FDA 510K Clearance and is covered under U.S. Patent # 8,402,965.

Click to See Patent Information

FDA Classification for Portable Liquid Oxygen System

It has solid rubber tires and can be moved by one person. The MODS is certified to D.O.T. 4L for safe transportation of Liquid Oxygen. The delivery rate/deration is 450 LPM at 200 +/- PSIG to multiple patients.

A Required Operating Temperature should be between -32 DEG F to 130 DEG F (0 C to 49 C) with an Outlet Pressure of 200 PSIG nominal.

portable liquid oxygen unit

Essex MODS is a portable, large-volume, supply and distribution system designed to provide life-saving oxygen to mass-incident, multi-patient injury sites.

portable liquid oxygen unit

SPECIFICATIONS:

Essex MODS MASS OXYGEN DISTRIBUTION SYSTEM

P/N 10C-0061-3

The  Essex MODS Mass  Oxygen  Distribution  System  is  a  low  pressure  portable  liquid  oxygen  storage  and  gaseous  distribution  system  that is mobile, extremely robust and made to the highest quality and durability standards.

SOLD OUT

Linksys USB2HUB4 Proconnect USB 4-Port Hub

Linksys USB2HUB4 also known as Linksys ProConnect USB 4-Port Hub by CISCO

LINKSYS USB2HUB4

Linksys USB2HUB4

Connect up to four Hi-Speed USB 2.0 or original 1.1 devices to a single USB port when using the Linksys USB2HUB4 ! When the hub connects USB 2.0 devices to a USB 2.0 port, you get data rates up to 480Mbps – perfect for graphics, multimedia, or gaming applications. The Plug-and-Play USB 4-Port Hub is fully backward compatible with earlier USB devices. It is also hot-swappable, so you can connect or disconnect USB devices on the fly. The Hub supports all USB devices, including digital cameras, scanners, game controllers, keyboards, portable data storage, mice, modems, printers, and more. To add even more USB peripherals, you can daisy-chain the USB 4-Port Hub to additional Hubs, up to a maximum of 127 USB devices.
Product Identifiers
Brand Linksys
Model USB 4-Port Hub
MPN USB2HUB4
UPC 745883552542
Key Features
Form Factor External
Ports Qty 4
Data Transfer Rate 480 Mbps
Data Link Protocol Hi-Speed USB
Compatibility PC
Features
Status Indicators Power, active
Networking
Networking Type Hub
Connectivity Technology Wired
Connectors
Interfaces 4 x Hi-Speed USB – 4 pin USB Type A
Power
Power Supply Power adapter – external

Purchase Online Now through Amazon

Expandability
The hub allows you to expand your USB connections. Users often need to connect external drives, iPods, digital video cameras, memory card readers and other external devices to their computer via USB connections. Adding a hub will allow you to make these connections without constantly swapping cables.
Hot Swappable
USB devices are often hot swappable. This hub fully supports that capability, allowing you to connect and disconnect devices without powering down your computer.
Self Powered
An AC adapter is included to power the hub, allowing you to provide ample power to your external devices when they are connected to your computer.

Linksys USB2HUB4 Specs

Interface – Connectors 4x USB 2.0
1x USB 2.0 for Connection to Computer
Data Transfer Rate 60 MB/sec
LED Indicators Yes
Bus/Host Powered Power Adapter Included
System Requirements
Computer USB 2.0 Port
Operating System Operating System Independent
M28 Lithium Ion XC Battery

M28 Lithium-Ion Battery Pack 28 Volt

M28 Lithium-Ion Battery by Vital Signs, Inc., A GE Healthcare Company

M28 Lithium-Ion Battery Pack – Compare to Milwaukee 28 Volt Battery Part # 48-11-2830

Most are looking for the Battery Pack when trying to solve the problem of how much one has to shell out to purchase a M28 Lithium-Ion Battery Pack from Milwaukee for their power tools. While others are simply just looking for an additional Battery Pack for their EnFlow IV Blood/Fluid Warmer kit. Either way, let me say it wasn’t until I saw the resemblance of this 28-Volt Battery Model 320 by enErgy 1 Vital Signs, Inc. that I thought it looked just like the Milwaukee M28 Red-Lithium XC 48-11-2830. Upon further review, you can see it is very, closely related. Then looking at the charger Model 302, again, very closely related. Then when you see the Specs are the same or at least very close, and the fact it runs all Milwaukee tools that take the V28 or M28 then you know either Milwaukee made them for Vital Signs, Inc or they both use the same Manufacturer.

m28 lithium-ion battery

It has also been seen that a former employee of GE Healthcare also worked for Milwaukee and was an Engineer. Is there a relation here to how it came about or just coincidence? Either way, you can purchase one of these Batteries and not only use it for the EnFlow IV Fluid/Blood Warmer but as a backup battery or for any of your Milwaukee tools apparently (SAME SPECS AS MILWAUKEE 48-11-2830).

For those wanting, here is a link to ebay where you can purchase the M28 Lithium-Ion Battery:

M28 LITHIUM-ION BATTERY (Same Specs as Milwaukee 48-11-2830)

More Information on the M28 Lithium-Ion Battery Pack

  • NSN:                             6515-01-595-5282
  • REF:                               91000320
  • MANUFACTURER:      Vital Signs, Inc., A GE Healthcare Company
  •                                      enErgy™ I Lithium-Ion XC M28
  •                                      Model 320
  •                                      Li-ion Battery
  •                                      28V Li-ion 

 

THE ABOVE STATEMENTS ARE PROVIDED BY A THIRD PARTY AND WE DO NOT GUARANTEE THE ACCURACY OF THIS INFORMATION. WE NEITHER ASSUME RESPONSIBILITY NOR MAKE ANY WARRANTY REGARDING COMPATABILITY; NOR DO WE ADVISE THIS BATTERY AS AN OEM REPLACEMENT OF THE MANUFACTURERS.

Blog regarding Specs of item here…  The Garage Journal

  • CAPACITY:                    3.0 Ah
  • VOLTAGE:                    28 Volts
  • TECHNOLOGY:            LI-ION
  • STYLE:                           Slide-On
  • CONDITION:                New
  • PRODUCT WEIGHT:      2.35 Pounds
  • Up to 2x the runtime of regular 28 Volts NiCd
  • Easily check the battery life with a built in fuel gauge
  • Protects tools from damage with onboard overload protection
  • Utilizes digital power management to provide extended life plus longer runtime

Cisco Catalyst WS-C4507R-E 7-Slot Chassis

CISCO CATALYST WS-C4507R-E 4500E SERIES 7-SLOT CHASSIS  RACK-MOUNTABLE SWITCHES

The Cisco Catalyst WS-C4507R-E offers 8 supervisor engine options. It provides a common architecture that can scale up to 388 ports. The Cisco Catalyst WS-C4507R-E also offers high availability by supporting 1+1 redundant supervisor engines with subsecond failover time and full-image In-Service Software Upgrades (ISSUs). Nonstop forwarding with Stateful Switchover (NSF/SSO) and ISSU help to ensure continuous packet forwarding during supervisor engine switchover to help ensure high availability for collaboration applications and voice over IP (VoIP).

Cisco Catalyst WS-C4507R-E
Cisco Catalyst 4500 E Series WS-C4507R-E

The E-Series chassis come in four different form factors. This Listing is for the 7-slot (4507R-E) Cisco Catalyst 4500 e Series Chassis. It is Brand New (not in original box) and has never been used (Military Surplus Item) NEW-Old Stock. It’s extremely flexible and supports 6 Gbps and 24 Gbps per line-card slot.

ONLY this 7-Slot (and 10-Slot) has Integrated resiliency found in the Cisco Catalyst 4500E Series which includes 1+1 supervisor engine redundancy (7-slot only), redundant fans, software-based fault tolerance, and 1+1 power supply. This Chassis is the WS-C4507R-E and comes as it does from the Factory – Fan, NO Power Supply, and Redundant Supervisor Capable. .

Cisco Catalyst Supervisor Engine Software Minimum Requirements (WS-C4507R-E):

  • – Cisco IOS Software Release 12.2(40)SG for Supervisor Engine V-10GE or 6-E; or
  • – Cisco IOS Software Release 12.2(52)SG for Supervisor Engine 6L-E; or
  • – Cisco IOS XE Software Release 3.0(1)SG for Supervisor Engine 7-E.

WS-C4507R-E chassis support up to 34 switched 10 Gigabit Ethernet ports. The performance capacities of the Supervisor Engine 7L-E on this Cisco Catalyst 4507R-E Chassis is 24 Gbps/slot (The 4507+R is 48 Gbps/slot).

Cisco Catalyst WS-C4507R-E Chassis
Cisco Catalyst WS-C4507R-E Chassis 7 Rack Mountable Switch

The Cisco® Catalyst® 4500 Series Switches enable borderless networks, providing high performance, mobile, and secure user experience through Layer 2-4 switching investments. It enables security, mobility, application performance, video, and energy savings over an infrastructure that supports resiliency, virtualization, and automation. Cisco Catalyst 4500 Series Switches provide borderless performance, scalability, and services with reduced total cost of ownership and superior investment protection.

Product Dimensions 12.5 x 17.3 x 19.2 inches
Item Weight 44.5 pounds
Shipping Weight 50 pounds
Item model number WS-C4507R-E
Manufacturer CISCO SYSTEMS