AutoMedx SAVe Simplified Automated Ventilator

AutoMedx SAVe Simplified Automated Ventilator 600×10

The AutomedX SAVe Simplified Automated Ventilator is designed to be quickly deployed in a pre-hospital environment by a BLS or ALS provider, a medic or any first responder with limited training. It is lightweight, rugged, hands-free, and contains a number of alarms and safety features not found in similarly priced devices. The SAVe delivers an AHA compliant tidal volume (600mL) at a fixed respiratory rate (10 bpm) which removes any guesswork and reduces errors.

automedx save

Portable, easy to use, safe and cost effective the SAVe is the ideal alternative to bag-valve-masks or expensive transport ventilators.

This Ventilator is in great condition and great working order. Also been kept in storage and has been handled only to maintain the devices functionality per annum when it was in use with the US Government. This is the SAVe I Ventilator and includes all the Accessories needed in order to use as well as a Hard Case to keep it SAFE

AutoMedx SAVe Simplified Automated Ventilator 600X10

Purchase NEW or USED AutoMedx SAVe Ventilators on or go to and shop around

  • Simplified Automated Ventilator (SAVe) – Primary Unit
  • Single-Use Patient Circuit and Pressure Tubing x 2
  • External power supply and AC plug
  • Supplemental O2 Tubing
  • Waterproof, Military Quality, Pelican Hardigg Hard Case
  • Training Slides (in lieu of Manual)

The device addresses the dangers associated with bagging patients and frees up a responder to address other injuries, perform compressions, attend to other patients or further assist in transporting the patient.

SAVe Ventilator

The Ventilator itself and Listed Accessories below all come in a PELICAN HARDIGG hard case.

The ventilator is completely self-contained, weighs only 3 pounds and does not require a compressed gas source. It can be used with a mask or a secure airway. Low pressure supplemental oxygen can be used if desired. The SAVe will deliver ambient air for up to 5.5 hours on a single battery charge and may be recharged from a standard AC outlet. It is a set flow, time cycled, pressure limited (38 cmH2O) device.


Ventilation Mode: Positive Pressure ventilation
Tidal Volume: 600ml
FIO2: Ambient air (21%) or supplemental oxygen (21 to 62%) Peak Inspiratory
Pressure: 38cmH20
Inspiratory / Expiratory Time: 2.25 seconds / 3.85 seconds
Breathing Rate: 10BPM (fixed)
Alarms: Low pressure (disconnect), High pressure (blockage) and Low battery.
Alarm Mute: Yes (on – off switch)
Operating Time: 5.5 Hours on Lead – Acid rechargeable battery or continuous on AC power
Dimensions: 16.5 x 16.9 x 6.3cms
Weight: 1.3kgs (Ventilator)

The AutoMedx SAVe Simplified Automated Ventilator 600X10 (SAVe) mitigates the potential for injury, reduces operator error, complies with guidelines and improves a medical responder’s ability to perform other critical task. It is ideally suited for situations where the use of pressurized gas is inadvisable or unavailable, or where size, weight, ease of use and portability are a consideration. Forward deployed field medics, mass casualty incident coordinators within the Department of Homeland Security and EMS professionals will find the device well suited to their needs.

AutoMedx SAVe Simplified Automated Ventilator

Success Stories

  • Afghanistan Battlefield
  • The SAVe was used post operatively in Kenya Kenya
  • South African Dignitary Evacuation

Benefits and Features:

Easy to Use:
• Single knob operation
• Low Training Requirements
• Hands-Free

• Allows Spontaneous Breathing
• Accepts Up to 6LPM of supplemental O2
• Powered by Rechargeable Lead-Acid Battery or Electrical Outlet

• Single Tidal Volume and Respiratory Rate Reduces Chance of Operator Error
• Tidal Volume = 600 mL
• Breaths / Minute = 10
• EtCO2 Detector
• No Compressed Gas Required

Intelligent Design:
• Detects Blockage and Disconnects
• Fail-Safe Mechanisms and Visual/Audible Alarms
• Up to 5.5 Hours per Charge

Use Anywhere:
• Rugged, Compact Design (6.5 x 6.25 x 2.5 inches)
• Long shelf life and durability
• Lightweight (3.1 pounds)
• Self-Contained


Purchase the Accessory Kit for $284.95 + Shipping which includes the following:

1 Battery Charger External power supply and AC plug for North America or European Standard Outlet
1 Single-Use Patient Circuit and Pressure Tubing
1 Supplemental Oxygen Tubing
1 Oxygen Mask



Outstanding Quality and Value – Propaq Encore
Unmatched durability: Engineered to withstand shock up to 50g. The preferred monitor for air transport programs and military agencies around the world. Just a few of the Key Quality and Value points:

  • Low annual cost of ownership and unmatched reliability
  • One monitor suited for both transport and bedside — no break in monitoring and no need to change sensors
  • MUST PURCHASE Accessories and AC Power Adapter and you’ll be ready to use

Features common to all Propaq Encore Models

  • ECG, 3-lead or 5-lead configurations, 0.05-40/0.5-40 Hz
  • NIBP, with neonatal, pediatric and adult modes
  • Temperature, 2 channels: YSI 400 and 700 series-compatible connectors
  • Defibrillator Synchronization
  • Real-time Analog output of ECG
  • Electrocautery noise suppression on all channels except Impedance
  • Pneumography


Propaq Encore Model 202EL


Motion Tolerant Monitoring – Propaq Encore 

Welch Allyn’s patented Smartcuf® NIBP available with motion-tolerant pulse oximetry (SpO2) technology from Masimo® or Oximax® technology from Nellcor. Accurate readings during motion or low perfusion lead to more informed treatment decisions, fewer nuisance alarms and quicker readings save valuable time. Ideal for transport, pediatric, shivering or shock patients.

  • List of Features:
  • • Low annual cost of ownership and unmatched reliability
    • One monitor suited for both transport and bedside — no break in monitoring and no need to change sensors
    • MUST PURCHASE Accessories and AC Power Adapter and you’ll be ready to use

Roll Stand Kit for Welch Allyn Propaq Encore (CS SPO2 Monitor)
MPN: DU-PR-0013-04

GCX Roll Stand Kit for Welch Allyn Propaq

See Installation Guide at GCX Instrument Mounting Systems

PROPAQ ENCORE MODEL 202EL (No Invasive Pressure)

  • Pulse Oximetry (SpO2)
  • Capnography (CO2) (available only with SpO2):
  • Mainstream Capnography (MCO2)
  • Sidestream Capnography (SCO2)
  • Dualstream Capnography (Both MCO2 and SCO2)
  • Impedance Pneumography (RESP) (available only with SpO2)
  • Printer (Not Included)
  • HP-compatible side panel

Thoracic Drainage Aspirator Gomco® 6053

Thoracic Drainage Aspirator Gomco® 6053

This mobile aspirator is designed to reestablish vacuum within the pleural cavity following thoracic and cardiac surgery. The Thoracic Drainage Aspirator Gomco® 6053 and The Thoracic Drainage Aspirator Gomco® 6050 are basically the same Except the Gomco® 6053 is Manufactured Specifically for The United States Government. That is the U.S. Military basically. The benefit here is that the Model 6053 includes the integrated step-down transformer enabling the use of this Thoracic Drainage Aspirator Gomco® 6053 in areas supplied with 230 volts.

We purchased these through a government procurement – bulk purchase from the U.S. Military which is a NEW, Unused, Government Surplus Medical Device. As such, we are able to pass the savings on to our customers by offering this AS-IS, in NEW Condition, with absolutely no signs of wear in original packaging but not sealed. We only verify and check that item is receiving the correct voltage and powers on. We have a SOLD OUT of these on However, we do have a limited number available in stock which you can purchase from us on eBay by clicking here or through Your purchase is made through PayPal on their secured and encrypted servers.

Like the Gomco® 6050, the Thoracic Drainage Aspirator Gomco® 6053 is designed to reestablish vacuum within the pleural cavity following thoracic and cardiac surgery. With the Model 6053 you get to choose whether you want to use U.S. Standard Electric 115V or use 230V Electric. Whereas, on the Gomco® 6050 Model you purchase either or. It is my understanding that to date, the option to have both, well, it’s not an option. Which is fine for most users and is definetely a big plus for those that want that option.


Gomco® 6053 Thoracic Drainage Aspirator

Provides regulation of suction drainage from 0 to 50 cm of water for rapid removal of fluids and gas from the pleural cavity. This pump offers high flow rates and a dual 2800 ml glass collection bottle system with two calibrated water seal tubes and two drainage tubes. A cap is provided when only one drainage tube is required. This unit is UL listed and CSA Certified.

Here are the Basic Specifications of the Thoracic Drainage Aspirator Gomco® 6053


  • Sound Level: Less than 64 dBA
  • Pump Type: Turbine
  • Electrical Cord: 6′ hospital grade
  • Dimensions: 18″ W x 17″ D x 33″ H (46 x 43 x 84 cm)
  • Weight: 78 lbs. (35 kg)
  • UL/ETL Listed: Yes
  • Regulatory Approvals: FDA, HC

By purchasing the Thoracic Drainage Aspirator Gomco® 6053 instead of the Gomco® 6050, you get to enjoy a large price break or discount in comparison. Here is the Electrical Information as it’s listed on the Model 6053:

  • Model: 01-32-6053                       115V/50-60 Hz or 230V 50-60 Hz
  • Model: 01-32-6050                       115V/50-60 Hz
  • Model: 01-33-6050                       220V/50-60 Hz
  • Collection Bottle = 2 Glass Bottles (Plus 1 Additional in Kit. See Below) *
  • Compressor = Continuous Duty High-Volume Pump
  • Vacuum Range = 0-50 cm H2O
  • Flow Rate = 110 l pm (minimum)
  • Dimensions H x D x W = 33x17x18 in / 84x43x46 cm
  • Shipping Weight = 78 lb. / 35 Kg.

One Suction Collection Bottle Kit. Includes the following:        

01 3966 Night Light
01 3105 Gallon Bottle
02 3099 Shut Off Cap

The Thoracic Drainage Aspirator Gomco® 6053 is a high performance mobile aspirator specialized for emergency thoracic drainage in hospitals. It generates up to -50 cm H2O of vacuum pressure with a 110 lpm flow rate at open flow. Vacuum Range is 0 to -50 cm H2O (0 to -36.8 mm Hg) with Flow Rate at 110 lpm at open flow.

Key Features

  • Used in emergency situations where vacuum must be quickly restored to the pleural cavity
  • Two drainage tubes allow for fluids and air to be removed simultaneously
  • Water seal in the collection bottle prevents aspirated air from reentering the chest
  • Easy-to-store and transport compact design with a flat stainless steel top
  • Convenient storage for 6′ electrical cord with hospital-grade plug

Gomco Model 6053 Brochure


Iteleti ReMed Sells New, Refurbished and Used Medical Equipment Oklahoma City

Sorensen Mobile Suction Apparatus 2590-120G

Sorensen Mobile Suction Apparatus 2590-120G

This is a sturdy, convenient, easy-to-use unit designed for mild intermittent and mild intermittent/constant drainage. It produces a gentle suction with minimum noise, and are capable of dependable operation over lengthy periods of time for post-operative care.

The Sorensen 2590 (Noise-Free) Thermal Intermittent Surgical Suction Machine features a disposable, hydrophobic / bacteriostatic filter designed to protect both the pump and the ambient environment from aqueous or airborne bacterial contamination; as seen here. The Model 2590 by Sorensen is a post-operative mobile unit designed to deliver mild intermittent rise suction for use in abdominal decompression or drainage of the abdomen, bladder and other body cavities. It is ideal when either 90 or 120 mm of vacuum is required.




Quiet, Mobile, Reliable, Lightweight, Dependable, Large capacity, Hospital-grade plug, Solid state construction, Sturdy and well balanced, Long lasting performance, Non-mechanical operation, Minimum repair or downtime, Automatic air vent overflow cutoff, Convenient built-in line cord storage, Disposable hydrophobic/bacteriostatic filter, Offered with a 2200 ml collection bottle, Automatic continuous operation (90 or 120 mmHg), Chemical resistant stainless steel space-saving top.

Easy rolling 3” (8 cm) ball bearing caster with two locking ones, and is Designed for extended periods of continuous operation.


Purchase Medical Equipment Online at Iteleti ReMed’s NEW Online Store at Shop + Buy = Ship



Solid state construction offers automatic intermittent operation that’s so quiet that you’ll hardly know that it’s working. Non-mechanical operation delivers long lasting performance with minimum repair or downtime. SORENSEN MOBILE SUCTION APPARATUS MODEL 2590 Mobile Intermittent Thermal Drainage.

You can download or view the Sorensen Model 2590 brochure on Impact Instrumentation Inc website located here is a great companion and is recommended even that it be used with the Wangensteen suctioning technique.


Sorensen Mobile Suction Apparatus Model 2590

SORENSEN MODEL 2590 Mild Intermittent Thermal Drainage Aspirator

Due to the US Military having overstocked such items, Iteleti Medical entered into a contract to purchase these Government Surplus Medical Devices. For more information about the Contracts of the Manufacturer (Impact Instrumentation Inc | Sorensen) of this MOBILE SUCTION APPARATUS, such as their recent Government Contracts click here. This Item Includes the 2200 ml collection bottle as shown, graduated in cubic centimeters

NEW IN OPENED BOX means that we have removed item to Verify it’s operational and then reinserted back into box. (We DO NOT SALE any medical device that has been altered in any way that slightly or significantly changes the product’s performance or safety specifications)

OKC Used Medical Equipment

Purchase Used Medical Equipment Online

At Iteleti Medical you can purchase OKC Used Medical Equipment like patient monitors, ventilators, and more. Please note, all ReMed Equipment is Refurbished (if applicable) by the OEM. Our Company does not refurbish any of the Used Medical Equipment Oklahoma City that we sell. Items are sold as-is and Warranty is per the Manufacturer. We do not offer or imply any guarantees or warranties on any equipment sold.

If the item is to be used in conjunction with patient care and/or diagnosis, it is the sole responsibility of the purchaser or buyer of said medical device, to obtain any and all proper certifications and licenses if applicable for the use of the device in there City, State, and Country. It is highly recommended and wise to have a bio-med completely check the product for its performance and safety parameters before actual use for patient care and/or diagnosis.

 OKC Used Medical Equipment

Used Medical Equipment Oklahoma City

Sonicor “It” Series, Large Volume Ultrasonic Cleaning Tanks with Immersible Transducers, Heat, and Filtration Systems. Sonicor “IT” series are rugged, large capacity, industrial ultrasonic cleaning systems that are made to perform and also offer some of the best performance. Some examples of what you can find would be Ultrasonic Generators or even Immersible Transducers


iteleti medical equipment

 Your Time is Money!

Our Commitment to You is Bottom Line Prices

Spend Less of Both

Medical science is an ever changing field and Information provided, may be, outdated, partial or incomplete and may be inaccurate or useless or contain mistakes. Iteleti disclaims any obligation, responsibility or liability, which concerns or relates to any information, product or services and is not liable for any direct or indirect claim, loss or damage resulting from use of this product, web page and/or any web site(s) linked to/from it.

All Medical Equipment Items are as we receive them; New unopened box; New opened box-tested; or is Refurbished Used Medical Item; cleaned and handled in accordance with the manufacturer’s instructions before shipped.  Nothing on this page should be taken to constitute professional advice or a formal recommendation and seller exclude all representations and warranties relating to the contents. It is the responsibility of the buyer to ensure that all equipment is functioning properly or refurbished before placing into patient use. If you have any questions or concerns please feel free to ask questions or send us an email.


(We DO NOT SALE any medical device that has been altered in any way that significantly changes the product’s performance or safety specifications.)